35000/20000 RPM Electric Nail Drill Machine Mill Cutter Sets For Manicure Nail Tips Manicure Electric Nail Pedicure File

Power : 20W No-Load Speed : 30000rpm Output voltage : 12V Size : 23cm*20cm*9.5cm Material : Plastic Model Number : 202A Electric Nail Drill Number of Pieces : One Unit Item Type : Electric Manicure Drill & Accessory 35000/20000 RPM Electric Nail Drill Machine Mill Cutter Sets for Manicure Nail Tips Manicure Electric Nail Pedicure File Feature:To ensure smooth  operation and safe performance, please read the manual carefully before use:1. Installation and wire connection1.1 Connect the 5-pin plug of the portable grinding head/hand piece to the OUPUT socket at  the main panel.1.2 Connect the pedal switch to the FOOT S/W socket.1.3 Select the proper drill bit accordìng to actual requirements, and fasten it to the handpiece.1.4 Turn the speed control knob to the left (MIN).1.5 Connect with the main source power.2.  Operation2.1 Press the function switch to HAND for manual control, the indicator will be on and the  grinding head starts to moving slowly.2.2 Turmn the SPEED CONTROL to the right to accelerate the speed.2.3 When the function switch is pressed to FOOT, step on the pedal and the machine starts  to work. (foot switch is optional).2.4 The turning directions can be swapped: FWD means clockwise direction and REV means  counterclockwise direction.2.5 Adjust the speed of the grinding head within a reasonable range.2.6 Please adjust the handpiece to the lowest speed before changing forward/backward direction.3. Instructions3.2 Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the  minimum before turning off and switch the main power source to 0.3.3 After operation, put the grinding head on the top of the main panel.3.4 While the grinding head is in operation,  never pull out the 5-pin plug of the portable grinding head.3.5 For long idle time, please disconnect the source power.Specification:Main (power supply & control) partRated voltage range: 100~120V/60 Hz, 220~240V/50 HzRated power input:18W or 32WOutput rated voltage: DC0-13V or 18VHandpiece (motor) partWorking voltage:DC0-13V or 18VRated current:1.5A or 1.8ARated speed: 0-20000RPM or 30000RPMPackage Included:1x Main Machine;1x Handpiece;1x Foot W witch1x Handpiece Support6x Drill Bits1x User Manua(English)