Električni bicikl za sve terene za odrasle Vitilan V3 2.0 Folding Fat Tires

1200W Peak Power Motor:VITILAN V3 adult electric bicycle is equipped with a powerful 48V 750W brushless motor with a peak power of 1200 watts, a top speed of 45KM/H, and a torque of up to 80NM, which can easily conquer a 35-degree slope. The 750W motor provides a constant output power source, you can easily traverse hills, slopes and other highlands. 80km long range:V3 folding ebike provides a range of up to 70-80km in assist mode on a flat road, It can also ride 50-60km in pure electric mode, The battery can be removed, you can charge at home or in the office, with a full charge time of 6hours. Smart Color Screen Display and Cruise Control: VITILAN V3 electric bicycle provides 3 riding modes, and the smart LCD color screen provides digital display, which can provide accurate Single mileage, speed and total mileage.Even if you are riding in the sun, you can clearly see the screen display. Press and hold the rotary throttle for 8 seconds during riding, and the current speed is fixed. The cruise control system frees your fingers to enjoy a wonderful driving experience. 20*4.0 Chaoyang fat tires and Foldable Frame:With 20*4.0-inch Chaoyang puncture-proof fat tires and good performance front suspension fork,V3 can take you to almost unlimited places: city center, rocky roads, beaches, snow-swamped suburbs and even urban jungles. Additionally, the V3 e-bike is constructed from a 6061 aluminum alloy frame and offers a payload of up to 150kg. The V3 weighs only 31kg and is foldable, making it suitable for apartments, cars and other small spaces. Integrated Headlight & Taillights:Bright 48V headlight and rear LED lights illuminate the front road for your safety during day and night riding.The superman-like rear turn signal can be a good safety warning when you are riding in traffic or the crowd. Specification: Model name:V3 2.0 Usage: Scenarios Urban, Commuting Motor:48V 750W MOTOR，PEAK POWER 1200W Battery:48V/13AH lithium battery Charger:48 V 2.0A Smart Charger Charging:6 Hours Pedal Assist:1-5 Level Controller:48V / 25A Display:48V 81F LCD Colorful Display， USB charging port Light system:Rear Light/Signal Turn Light/48V LED Light Headlight Bell: Electric Horn Brakes:180mm Hydraulic Dual Disc Brakes Fork:Mechanical Spring Front Fork Throttle: Twist Throttle Gear shifter:Shimano 7 Speed Gear Tire: 20" x 4" Chaoyang Puncture-proof Fat Tires Top Speed:45km/h Max Range:80km Bike Dimension:167cm*40cm*132cm Bike Weight:31KG Package Size :101*45*80CM Package Weight:39.8kg Max Load:150kg Suggested Rider Height:160-200cm IPX Level:IPX6 EU/UK Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. All bikes 90% have been installed, one year warranty on the frame, six months warranty on the battery, controller, instrumentation, etc. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Italy After Sale Point: Weimiao ji Via Ramiro ortz 6/3 65126 pescara IT 3778179737 Before you go to the repair store ,please contact us first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.